Product Description
Toothpaste making machine Toothpaste Making Production Line
General Introduction
Pizza SauceMaking Machine Pissa Sauce Vacuum Emulsifying Mixer
This machine is vacuum emulsifying mixer.It is a processing equipment with mixing, homogenizing, emulsifying,heating fuction, etc.The machine is widely used to produce cosmetic cream,lotion,as well as food cream,paste ,etc.It is the first choice of cosmetic factory which manufacture high quality products. The machine adopts the component of international famous brands, which ensure durable quality and operational stability of the machine. According to the feedback from our customers, this design style provides great satisfaction performance to them.This device is mainly composed of Water phase pot, Oil phase pot, Emulsifying pot, Vacuum system, Lifting system(optional), Electric control system, Operation platform etc.
Vacuum Emulsifying Mixer Features
- SIEMENS frequency converter for speed adjustment, which can meet production of different technology requirement.
- The vacuum defoaming can make the materials meet the requirement of being aseptic.The vacuum material sucking adopted can avoid dust,especially for the powder products.
- import mechanical sealing, good sealing effect and long working life.
- The tank body and the pipes adopt mirror polishing, which fully conforms to GMP standards.
- Material contact parts all use SUS316L stainless steel.
- The heating method mainly include electric or steam heating for customer's choice.
- Advanced PLC touch screen control is optional.
- The emulsifying pot lid can adopt hydraulic lifting system, easy to clean and the cleaning effect is more obvious, the emulsifying pot can adopt tilt discharge.
Advantage
- It's used for produce the cream, lotion, paste, ointment, paste, conditioner, etc. Complex scraping board blending oar is suitable to every kind of complicated recipe and achieve optimizing effect;
- Polytetrafluroethylene scraping board cater to body of blending groove and scrape out viscosity material on boiler wall;
- Homogenizer is installed on boiler bottom to increase motor power more thoroughly and strongly. During few production, it can exert homogenizing effect fully;
- Mightiness balance isotactic curve rotor is matched with stator with corresponding structure to realize liquid high-capability cut,rubbing,centrifugal to make sure exquisite and slick cream; boiler body and pipe surface mirror polishing 300EMSH (sanitation grade) accords with Daily Chemical and GMP regulation.
- Customer can choose frequency conversion timing homogenizer and highest rotate speed is 4500 r/min.
Technical Parameter:
| Model |
Main pot |
Water pot |
Oil pot |
Main pot power |
Hydraulic System |
Vacuum pump
power(Kw) |
| Volume(L) |
Wall scraping |
Homogenizer |
| RHJ-5L |
5L |
|
|
0.18 |
1.1 |
0.75 |
0.55 |
| RHJ-10L |
10L |
7 |
5 |
0.37 |
1.1 |
0.75 |
0.75 |
| RHJ-20L |
20L |
14 |
10 |
0.75 |
1.5 |
0.75 |
0.75 |
| RHJ-50L |
50L |
35 |
25 |
1.1 |
2.2 |
1.5 |
1.5 |
| RHJ-100L |
100L |
70 |
50 |
1.5 |
3 |
1.5 |
1.5 |
| RHJ-200L |
200L |
140 |
100 |
2.2 |
4 |
1.5 |
2.2 |
| RHJ-300L |
300L |
210 |
150 |
3 |
5.5 |
1.5 |
2.2 |
| RHJ-500L |
500L |
350 |
250 |
4 |
7.5 |
1.5 |
2.2 |
| RHJ-1000L |
1000L |
700 |
500 |
5.5 |
11 |
2.2 |
3 |
Founded in 2000, with 5 production lines and covering an area of 12,000 square meters, our factory has developed into a professional manufacturer of cosmetics machinery and equipment, by integrating R&D, manafacturing, sales and service. Advanced production equipments are the guarantee for high quality products.
Our product catagories mainly include: Vacuum emulsifying mixer, Liquid washing mixer, Water treatment equipment, Perfume machine, Filling machine, Packing machine, Labeling machine etc. We are able to supply a wide range of high quality products for your One-stop sourcing in our exhibition center.
We attend exhibitions all around the word every year.You are welcomed to see our product and new designed item there .We hope a face to face communicate and service could helpful to our cooperation.
When we make delivery ,the products will be packed in wooden case to avoid of destroy.
A quality department has been set up to control the product quality during every process of production. For years, we are strictly implementing International Quality Management System ISO 9001.
After-sales Service
1.Warranty time: one year, from the date which the product is qualified commissioning.
Any damage except the wrong operation during warranty period is repaired freely.But the travel and hotel expenses should be count on buyer.
2. Commissioning services: the product's installation and commissioning at the demand side, our engineers will not leave there until get your agreement.
3. Training services: our engineers will train your staff to operate it during the period of installation and commissioning,
and they will not leave there until your staff can operate it properly and normally.
4. Maintenance services: any malfunction happened, once you inquiry us, we will reply you within 48 hours except the special reasons.
5. Lifelong services: we provide lifelong services for all the products we sold out, and supply the spare parts with discount price.
6. Certificate services: we can provide related certificates to customers freely according to the request of customers.
7. Inspection services: you can ask the third part inspection company or your inspector to inspect the products before shipment.
8. The file: the Manual Specification, report of the material which used to the equipment and other documents related to the GMP authentication information will be provided by us.
RFQ
Q: Are you a factory?
A: Yes we are a factory with more than 20 years manufacturing experience. One is in Jjiangsu Province,
Another is in Guangzhou next to our office.
Q:I'm new in our industry,but I'm planing to set up a factory, what canI do?
A: We will design the most suitable proposal based on your actual situation, such as the daily production,raw material formula, factory layout, etc. Also we would like to intro- duce some excellent suppliers of raw materials, bottles,labels, etc if needed. After sales, engineer will be send to fields installation, training and commissioning.
Q: How can you control the quality before delivery?
A: First, our component/spare parts providers test their products before they offer com- ponents to us.Besides, our quality control team will test machines performance or running speed before shipment. We would like to invite you come to our factory to verify machines yourself. If your schedule is busy, we wil take a video to record the testing procedure and send the video to you.
Q:Are your machines difficult to operate? How do you teach us using the machine?
A: Our machines are fool-style operation design,very easy to operate.Besides,before delivery we will shoot instruction video to introduce machines'functions and to teach you how to use them.If needed engineers are available to come to your factory to help install machines, test machines and teach your staff to use the machines.
Q: Can I come to your factory to observe machine running?
A: Yes, customers are warmly welcome to visit our factory.
Q: Can you make the machine according to buyer's request?
A: Yes,OEM is acceptable. Most of our machines are customized design based on cus- tomer's requirements or situation
){kind=link}
){kind=link}